Product ID:CAVITY WHITE S.G. AEROSOL T/U FOR 2-W-129
MSDS Date:01/01/1987
FSC:8010
NIIN:00B190060
MSDS Number: BKLTH

SCM CORPORATION - GLIDDEN COATINGS & RESINS DIV.

925 EUCLID AVENUE
CLEVELAND, OH 44115

Emergency Phone: 216-826-5566

Info Phone: NONE SPECIFIED BY MANUFACTURER.

Cage: 90756

SCM CORPORATION

15049 CLEVELAND, OH 44115 US

Telephone: 216-344-8000

Cage: 90756

XYLENE

CAS: 1330-20-7

Fraction By Weight: <87%

ACGIH TLV: 100 PPM

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

METHYL ISUEUTYL KETONE

CAS: 108-10-1

Fraction By Weight: <19%

OSHA PEL 100 PPM/75 STEL

ACGIH TLV: 50 PPM/75 STEL; 9293

EPA Report Quantity: 5000 LBS

DOT Report Quantity: 5000 LBS

EPOXY RESIN SOLIDS

CAS: 25068-38-6

Fraction By Weight: 1%

SILICA

CAS: 7631-86-9

Fraction By Weight: 2%

TOLUENE

CAS: 108-88-3

Fraction By Weight: 4%

OSHA PEL 200 PPM/150 STEL

ACGIH TLV: 50 PPM; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS

ETHYLENE GLYCOL MONOBUTYL ETHER

CAS: 111-76-2

Fraction By Weight: 4%

OSHA PEL S, 50 PPM

ACGIH TLV: S, 25 PPM; 9293

TITANIUM DIOXIDE

CAS: 1317-80-2

Fraction By Weight: 10%

ACGIH TLV: 10 MG/M3

LD50 LC50 Mixture:NOT SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:NO
Health Hazards Acute and Chronic:NONE SPECIFIED BY MANUFACTURER.
Effects of Overexposure:EYE, SKIN, & RESPIRATORY IRRITATION. PROLONGED
INHALATION MAY LEAD TO FATIGUE, DROWSINESS, DIZZINESS AND/OR
LIGHTHEADEDNESS, HEADACHE, UNCOORDINATION, AUSEA. PROLONGED OR
REPEATED CONTACT CAN CAUSE DE RMATITIS, DEFATTING, FATIGUE, NAUSEA,
SLURRED VISION, TEARING OF EYES. POSSIBLE SENSITIATION TO SKIN.
(SEE SUPPLEMENTAL)
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.

First Aid:INHALATION: MOVE PERSON TO WELL VENTILATED AREA. GET MEDICAL
ATTENTION IMMEDIATELY. SKIN: FLUSH FROM SKIN WITH WATER, THEN WASH
THOROUGHLY. REMOVE CONTAMINATED CLOTHING. EYES: FLUSH IMMEDIATELY
WITH W ATER FOR AT LEAST 15 MIN., GET IMMEDIATE MEDICAL ATTENTION.
INGESTION: GET EMERGENCY MEDICAL ATTENTION.

Flash Point Method:SCC
Flash Point:40.0F,4.4C
Lower Limits:1.0
Extinguishing Media:DRY CHEMICAL OR FOAM
Fire Fighting Procedures:WATER MAY BE USED TO COOL AND PROTECT EXPOSED
CONTAINERS.
Unusual Fire/Explosion Hazard:CLOSED CONTAINERS MAY EXPLODE WHEN
EXPOSED TO HEAT OR FIRE. VAPORS MAY IGNITE EXPLOSIVELY AT AMBIENT
TEMP. VAPORS ARE HEAVIER THAN AIR AND MAY TRAVEL FAR.

Spill Release Procedures:ELIMINATE ALL SOURCES OF IGNITION. VENTILATE
AREA WITH EXPLOSION-PROOF EQUIPMENT. USE ABSORBENT TO PICK UP
EXCESS RESIDUE. COMPLY WITH ALL APPLICABLE REGULATIONS FOR HEALTH
AND POLLUTION CONTROL.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:STORE BELOW 80F. KEEP AWAY FROM HEAT,
SPARKS AND OPEN FLAME. DO NOT STORE IN ALUMINUM CONTAINERS.
Other Precautions:USE ONLY WITH ADEQUATE VENTILATION. DO NOT TAKE
INTERNALLY. KEEP OUT OF REACH OF CHILDREN. KEEP CONTAINERS TIGHTLY
CLOSED AND UPRIGHT WHEN NOT IN USE. EMPTY CONTAINERS MAY CONTAIN
HAZARDOUS RESIDUES.

Respiratory Protection:USE NIOSH/MSHA APPROVED RESPIRATORS IN
ACCORDANCE WITH OSHA STANDARD 29 CFR 1910.134.
Ventilation:PROVIDE DILUTION VENTILATION OR LOCAL EXHAUST TO PREVENT
BUILD-UP OF VAPORS. USE EXPLOSION-PROOF/NON-SPARKING EQUIPMENT.
Protective Gloves:IMPERVIOUS GLOVES
Eye Protection:SAFETY GLASSES OR GOGGLES.
Other Protective Equipment:IMPERVIOUS CLOTHING, SAFETY SHOWER, EYE
WASH.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
POSSIBLE VOMITING, DIAHRRHEA, MENTAL APATHY, CENTRAL NERVOUS SYSTEM
DEPRESSION, ANESTHETIC EFFECT OR NARCOSIS, DIFFICULTY BREATHING,
CARDIAC/BLOOD ABNORMALITIES, CORNEAL INJURY, LIVER DAMAGE, KIDNEY D
AMAGE, UNCONSCIOUSNESS, ASPHYXIATION. OCCUPATIONAL OVEREXPOSURE TO
SOLVENTS WITH PERMANENT BRAIN & NERVOUS SYSTEM DAMAGE

HCC:F3
Boiling Pt:B.P. Text:231F,111C
Appearance and Odor:NOT SPECIFIED BY MANUFACTURER.
Percent Volatiles by Volume:76.33

Stability Indicator/Materials to Avoid:YES
OXIDIZERS, ACIDS, BASES, AND AMINES.
Stability Condition to Avoid:ELEVATED TEMPERATURES; CONTACT WITH
OXIDIZING AGENT.
Hazardous Decomposition Products:CARBON MONOXIDE, CARBON DIOXIDE.
Conditions to Avoid Polymerization:ELEVATED TEMPERATURES; CONTACT WITH
OXIDIZING AGENTS.

Waste Disposal Methods:DISPOSE OF IN ACCORDANCE WITH ALL APPLICABLE
REGULATIONS. AVOID DISCHARGE TO NATURAL WATERS.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.